Clinical Evaluation of Ceramage Inlays Cemented with Beautilink Self-Adhesive Resin Cement Versus Rely X Resin Cement in Carious Posterior Teeth

"According to the manufacturer's instructions (BeautiLink SA - Shofu USA)~* To enhance the adhesion, adhesive bonding agent BeautiBond Xtreme, Shofu will be applied on the tooth and cured according to the manufacturer's instructions.~* Press the plunger of the auto-mix syringe of Beautilink SA to dispence the cement on the adhesive surface of the restoration.~* Seat the restoration in the cavity and apply proper pressure after using Teflon to protect the adjacent teeth and help in the removal of the excess material.~* Light-cure the excess material for 1-2 sec with a light-curing unit followed by removal of the tack-cured material with a probe.~* Using a light-curing unit to cure each surface and marginal areas for 10 seconds. For areas where the light cannot reach, or when using opaque cement, hold the restoration in place for approximately 5 minutes after light-curing to allow for chemical curing."

"According to the manufacturer's instructions (Espe).~* To enhance the adhesion, adhesive bonding agent 3M™ Scotchbond™ Universal Plus Adhesive will be applied on the tooth and cured according to the manufacturer's instructions.~* Application of 3M™RelyX™ Universal Resin Cement into the cavity~* Seat the restoration in the cavity and apply proper pressure after using Teflon to protect the adjacent teeth and help in the removal of the excess material.~* Light-cure the excess material for 2-3 sec with a light-curing unit followed by removal of the tack-cured material with a probe.~* Using a light-curing unit to cure each surface and marginal areas for 10 seconds. For areas where the light cannot reach, or when using opaque cement, hold the restoration in place for approximately 6 minutes after light-curing to allow for chemical curing."