Failed Insertion of Ureteral Access Sheath During Flexible Ureterorenoscopy

A guidewire was placed in the ureter in the lithotomy position. Ureterorenoscopy was performed with an 8 Fr ureterorenoscope for active dilatation. An 11 - 13 Fr or 9.5 / 11.5 Fr UAS was attempted to be placed under fluoroscopy by the surgeon of the procedure. In cases where the UAS could not inserted, a 26 cm, 4.8 Fr JJ stent was placed under fluoroscopy and the procedure was terminated. Patients underwent a second f-URS session, 4 - 6 weeks later. After the JJ stent was removed, an 11 - 13 Fr UAS was placed in the ureter. Digital flexible ureterorenoscope was used as the flexible ureteroscope. Stone fragmentation was performed in dusting mode using a Ho:YAG laser with a 272 µ probe. After fragmentation, a 26 cm 4.8 Fr JJ stent was inserted into the ureter. The JJ stent was removed at 4 - 6 weeks postoperatively.

A guidewire was placed in the ureter in the lithotomy position. Ureterorenoscopy was performed with an 8 Fr ureterorenoscope for active dilatation. An 11 - 13 Fr or 9.5 / 11.5 Fr UAS was attempted to be placed under fluoroscopy by the surgeon of the procedure. In cases where the UAS could not inserted, patients were positioned in prone position and access was performed to the appropriate calyx with an 18-gauge percutaneous access needle using the triangulation technique accompanied by fluoroscopy, in the same session. After the guidewire was introduced into the pelvicalyceal system, sequential dilatation was applied with Amplatz dilatators, and a 21 Fr metallic sheath was placed. Stones were fragmented with a yttrium-aluminum-garnet (Ho:YAG) Laser lithotripter. At the end of the procedure, a 14 Fr nephrostomy catheter was placed in according to the residual stone, hemorrhage, and perforation status. In other cases, the procedure was concluded as totally tubeless.