Feasibility of Reducing Respiratory Drive Using the Through-flow System

"Ventilation will be applied in the TF mode with TF set to 0 LPM for 10 minutes. Patients will receive assist through the NAVA line of the tri-piece (NAVA set to similar settings as Servo period, \~60-80 LPM flow). Ventilation with Throughflow will be started at a TF flow of 5 LPM, and the NAVA flow will be reduced by 5 LPM. After 10 minutes measurements will be collected. If Edi is greater than or equal to 4 µV, TF flow will be increased to 10 LPM and NAVA flow will be adjusted to keep total flow constant. Measurements will be collected again after 10 minutes. TF flow will be increased in steps of 5 LPM and measurements collected every 10 minutes until Edi is below 3 µV or TF flow reaches the total flow observed during the NAVA period.~After either the Edi target has been met or TF flow has reached the total flow, ventilation with TF will be reduced in steps of 5 LPM every 10 minutes (the reverse of the above), while NAVA flow is accordingly adjusted to keep total flow constant."