30
Participants
Start Date
May 31, 2005
Primary Completion Date
November 30, 2007
Study Completion Date
July 31, 2008
Bipolar eletrocoagulation
Bipolar Eletrocoagulation was performed with a high-frequency electrosurgical generator (ERBE® ICC 200 Eletromedizin, Tubingen, Germany), using Gold probe (Wilson- Cook®) with 7 Fr diameter and 300 cm length. The power setting was 50 W. Coagulation of each telangiectasia was achieved with the probes by applying light pressure directly on the telangiectasia.
Argon Plasma Coagulation
"Argon plasma coagulation was delivered using a spray-painting technique, with short applications at 40 W power with a gas flow of 1.0l per minute. APC equipment was an argon delivery unit (ERBE® ICC 300) coupled a high frequency surgery unit (ERBE® ICC 200). Only the end-firing probe with 2.3 mm and 220 cm length was used. The probe was purged with argon, tested and passed though the endoscope until it extends approximately 1 cm from the tip. The probe was hold just above the mucosal surface and the contact was avoided. During the procedure periodic suction was made to prevent over-distention with gas and consequently patient discomfort."
Federal University Of São Paulo - Gastroenterology, São Paulo
Federal University of São Paulo
OTHER